Data line surge protector
series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment’s signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage.
Features Of SPD For Network / Data Line Surge Protector
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
RJ45 connector
Application Of SPD For Network / Data Line Surge Protector
CAT5e and CAT5 compatible
10/100 Base-T Ethernet protection
LAN, FDDI，CDDI, ATM
PDH, SDH, SPDH
Industrial control
Loss prevention system device; Security system; Security integration.
IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system
Installation And Wiring Diagram Of SPD For Network / Data Line Surge Protector
Specification Of SPD For Network / Data Line Surge Protector
|
Model |
D05J4 |
D05J4-8 |
D05J4-16 |
D05J4-24 |
D05J8H |
|
Lightning projection zone(LPZ) |
2 |
||||
|
Standards Compliance |
IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 |
||||
|
According to IEC61643 |
III |
||||
|
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||
|
Max continuous operating voltage Uc |
5V |
||||
|
Nominal discharge current (8/20µs) In |
3KA |
||||
|
Max discharge current Imax (8/21µs) Imax |
5KA |
||||
|
Voltage protection Level @C2(8/20µs) Up |
≤55V |
||||
|
Voltage protection Level @C3(1kV/µs) Up |
≤25V |
||||
|
Rated load current IL |
200mA |
||||
|
Limiting Voltage(10/700µs) |
≤20V |
||||
|
Cut-off Frequency fG |
250MHz |
||||
|
Response time tA (L-N/N-PE) |
1ns |
||||
|
Protection line |
1/2,3/6 |
1/2,3/6,4/5,7/8 |
|||
|
Protection port |
1 |
8 |
16 |
24 |
1 |
|
Mounting |
Be Installed between protected equipment and signal line |
||||
|
Adapt Transmission rate |
100Mbps 1000Mbps |
||||
|
Transmission standards |
100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6 |
||||
|
Dimension |
85(H)×25(W)×25(L)mm |
190 (H)×85(W)×48(L)mm |
482 (H)×86(W)×44(L)mm |
83 (H)×25(W)×25(L)mm |
|
|
Interface form |
RJ45 |
||||
|
IP code(IEC EN 60529) |
IP20 |
||||
|
Error rate |
≤10-12 |
||||
|
Material/color |
Aluminum/Blue |
||||
|
Insertion loss |
≤.3.0dB |
||||
|
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95％ |
Techwin is a professional spd supplier
in china.
Reviews
There are no reviews yet.