Dyneon Fluoroelastomer
Dyneon FG 5630Q
Dyneon FG 5690Q
Dyneon FLS 2530
Dyneon FLS 2650
Packing:25kg/box
Description:
Dyneon Fluoroelastomer FG 5630Q is a copolymer of vinylidene fluoride and hexafluoropropylene with a 65.9% fluorine content.Compared to diamine-cured compounds, Dyneon fluoroelastomer FG 5630Q offers various improved properties.
Dyneon Fluoroelastomer FG 5630Q can be used to manufacture O rings and other sealing rings used in food processing equipment for repeated-use food-contact applications.
Dyneon Fluoroelastomer FG 5690Q is a copolymer of vinylidene fluoride and hexafluoropropylene with a fluorine content of 65.9%. Dyneon Fluoroelastomer FG 5690Q can be used to manufacture O-rings and other sealing rings used in food processing equipment for repeated-use food-contact applications.
Dyneon Fluoroelastomer FLS 2530 is a molded grade, intermediate viscosity copolymer with 69% fluorine. This product offers excellent compression set resistance and improved chemical resistance compared with lower percent fluorine fluoropolymers.
Dyneon FLS 2530 is a copolymer of vinylidene fluoride and hexafluoropropylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations.
Notably, this product offers broad chemical and temperature resistance, as well as a proprietary incorporated cure technology that may help save time and increase throughput because a separate cure method is not required. In addition, this product stands out from others due to its 69% fluorine content which offers improved chemical resistance and excellent compression set resistance compared with lower percent fluorine fluoropolymers.
Dyneon Peroxide Cure Fluoroelastomer FLS 2650 is a low volume swell, high-fluorine terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene, plus cure site monomer. This (FKM) offers improved water and steam resistance over conventional fluoroelastomers, and can be used in transfer and compression molding.
In addition to its improved water and steam resistance, Dyneon Peroxide Cure Fluoroelastomer FLS 2650 can be used in blends with fluorosilicone, silicone, EDPM and other peroxide-curable elastomers. Additionally, Dyneon peroxide cure fluoroelastomer FLS 2650 allows for vulcanization of thick cross-section parts without fissuring.
Dyneon peroxide cure fluoroelastomer FLS 2650 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FLS 2650 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.
Reviews
There are no reviews yet.