Manufacturers of Permanent magnet(PM) Stepper Motor & PM Synchronous Motor:
1. PM Series:
| Diameter | 8mm | 10mm | 15mm | 20mm | 25mm | 35mm | 42mm | 55mm |
| Model No. | PM8S-020 | PM10S-020 | PM15S-020 | PM20S(L)-020 | PM25S(L)-048(024) | PM35S(L)-048(024) | PM42S(L)-048 | PM55L-048 |
2. PG Series: PM Stepper Motor with gearbox(with different gear ratio) & BYJ Series
| Diameter | 10mm | 15mm | 20mm | 24mm | 25mm | 28mm | 35mm | 42mm |
| Model No. | PG10S-020 | PG15S-020 | 20BYJ46 | 24BYJ48 | PG25S-048 | 28BYJ48 | 35BYJ46; PG35L-048 | PG42L-048 |
3. PL Series: PM Linear stepper motor(with lead screw):
| Diameter | 8mm | 10mm | 25mm |
| Model No. | PL8S-020 | PL10S-020 | PL25S-048(024) |
Permanent Magnet Stepper Gear Motor 35mm
Application :
HVAC/R Valve Actuation
Office Automation Printers, Copiers, Data storage
Medical Applications Pill dispensing Analysers
Telecommunication Antennae positioning Switching lines
Other Industries & Applications Robotics
Highlights :
Excellent open loop control – No encoders necessary
Digitally controlled – Easy to use with a micro processor
Cost effective – compact design, lower integration cost
Maintenance free – motor is brushless
Winding possibilities – Bipolar
General Specification:
| Item | Specification |
| Step Angle Accuracy | ±8%(full step, no load) |
| Resistance Tolerance | ±10% |
| Inductance Tolerance | ±20% |
| Temperature Rise | 80.C Max.(rated current,2 phase on) |
| Ambient Temperature | -20.C~+50.C |
| Insulation Resistance | 100MΩMin. ,500VDC |
| Dielectric Strength | 600VAC , 1s , 3mA |
Specification:
| Model | Step Angle (Deg.) | No. of Phase | Rated Voltage (VDC) | Current/Phase(A) | Resistance /Phase(Ω) | Holding Torque (Kgf.cm) | Detent Torque (gf.cm) | Pull-in Torque (gf.cm) | Wire Diagram |
| PG35L-048-01/8.4 | 7.5/8.4 | 4 | 12 | 0.4 | 30 | 1.2 | 500 | 700(at 100pps) | B |
| PG35L-048-01/19 | 7.5/19 | 4 | 12 | 0.4 | 30 | 10.0 | 2600 | 3500(at 100pps) | B |
| PG35L-048-01/19 | 7.5/19 | 4 | 24 | 0.218 | 110 | 12.0 | 2280 | 5000(at 100pps) | B |
| PG35L-048-01/30 | 7.5/30 | 4 | 12 | 0.4 | 30 | 3.0 | 1500 | 1500(at 100pps) | B |
| PG35L-048-01/60 | 7.5/60 | 4 | 12 | 0.4 | 30 | 8.0 | 3000 | 4500(at 100pps) | B |
| PG35L-048-01/120 | 7.5/120 | 4 | 12 | 0.4 | 30 | 10.0 | 6000 | 5000(at 100pps) | B |
Dimension
Customization On Call
Coil Modifications – Resistance and Inductance.
Magnets – to yield higher linear force or reduced detent levels.
Higher Strength Plastics for higher impact forces.
Reduced or increased Detent Force to suit the application.
Screw – metric or imperial tips, length.
Special Flanges, Connectors, End of motion detection sensors.
Wire Harness – connectors, pins, lead length, shrink tubing.
Examples of our customers:
Reviews
There are no reviews yet.