10/100 Industrial DIN-rail Mount Unmanaged Switches 065-74XX TB Series

SPECIFICATIONS

• APPLICABLE STANDARDS

IEEE802.3 10BaseT
IEEE802.3u 100BaseTX / 100BaseFX
IEEE802.3x Flow Control and Back pressure

• FIXED PORTS

All Models:
4 (models 065-74084FXTB and 065-74084FXSMTB),
5 (model 065-7405TB),
6 (models 065-74082FXTB and 065-74082FXSMTB),
or 8 (models 065-7408ATB, 065-74091FXSCTB,
and 065-74091FXSTTB) twisted pair ports meeting IEEE 802.3
10BaseT & IEEE 802.3u 100BaseTX standard specifications;
Category 5 or better cable,
100 meters maximum distance for 100BaseTX,
Category 3 or better cable,
100 meters maximum distance
for 10BaseT. Auto MDI/MDI-X and Auto-Negotiation Function supported.

Models 065-74091FXSCTB, 065-74091FXSTTB,
and 065-74091FXSMTB: 100BaseFX port, with SC Multimode, 2 km Span(model 065-74091FXSCTB)
or ST Multimode, 2 km Span (model 065-74091FXSTTB)
or SC Singlemode, 15 km Span (model 065-74091FXSMTB)connectors.

Models 065-74082FXTB and 065-74082FXSMTB: 
2 100BaseFX ports, with SC Multimode,
2 km Span (model 065-74091FXSCTB)
or ST Multimode, 2 km Span (model 065-74091FXSTTB)
or SC Singlemode, 15 km Span (model 065-74091FXSMTB)connectors.

Models 065-74084FXTB and 065-74084FXSMTB:
4 100BaseFX ports, with SC Multimode,
2 km Span (model 065-74084FXTB)
or SC Singlemode, 15 km Span (model 065-74084FXSMTB)connectors.
 

• LED STATUS INDICATORS

Per Switch: Power Status 1 & 2 (green); Fault (red)
Per 10/100BaseT/TX Port and 100BaseFX Port (where equipped): Link/Activity (green), 100 Mbps speed (amber)

• PERFORMANCE

Latency: <7.1 μs (LIFO).
Throughput: 14,880 pps for 10 Mbps, 148,800 pps for 100 Mbps
                                                                           (64-byte packets)
Switch Fabric Speed: 24.0 Mbps
                                      (non-blocking, wire speed performance)
MAC Address Capacity: 2 K MAC addresses
Buffer Memory: 768 Kb
Switch Architecture: Store and Forward

• POWER INPUT REQUIREMENTS

Redundant 10 to 48 Volts DC Terminal Block.
Optional hardened power supply sold separately.

• POWER CONSUMPTION:

12 V DC*0.99 A, 24 V DC*0.55 A, 48 V DC*0.39 A;
18.72 Watts Maximum.

• INSTALLATION

Included DIN-rail mount.
Optional wall mounting bracket available by special order.

• ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: -40°F to 167°F (-40°C to 75°C)
Storage Temperature: -50°F to 200°F (-45°C to 93°C)
Operating Humidity: 10 to 95% (non-condensing)

• PHYSICAL CHARACTERISTICS

Dimensions: 1.97 in. x 5.35 in. x 4.33 in.
                                           (50 mm x 136 mm x 110 mm)
Weight: 1.76 lb (0.8 kg.)
Housing: IP30 protection, metal case

• CERTIFICATIONS

ESD Standards (IEC 61000-4-2): 
Enclosure Contact: + / – 4KV; Criteria B;
Enclosure Air: + / – 8KV; Criteria B

Radiated FRI Standards (IEC 61000-4-3): 
Enclosure Ports: 10V/m, 80 to 1000MHz; Criteria A

Burst Standards (IEC 61000-4-4): 
Enclosure Ports: + / – 4KV*2.5 KHz; Criteria B;
D.C. Power Ports: + / – 4KV; Criteria B;
A.C. Power Ports: + / – 4KV; Criteria B

Surge Standards (IEC 61000-4-5): 
Signal Ports: + / – 1KV; Line-to-earth; Criteria B
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B

Induced RFI Standards (IEC 61000-4-6):
Signal Ports: 10V*0.15 – 80MHz; Criteria A
D.C. Power Ports: 10V*0.15 – 80MHz; Criteria A
A.C. Power Ports: 10V*0.15 – 80MHz; Criteria A
Earth Ground Ports: 10V*0.15 – 80MHz; Criteria A

Magnetic Field Standards (IEC 61000-4-8): 
Enclosure Ports: 30A/m*50, 60Hz; Criteria A
Voltage Dip Standards (IEC 61000-4-11): 
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B

Environmental Test Compliance: 
(IEC 60068-2-6) Vibration Resistance: 5G*150Hz; Criterion 3 (Operation/Storage/Transport)
(IEC 60068-2-27) Shock: 25G*11ms (Half-Sine Shock Pulse; Operation); 50G*11ms (Half-Sine Shock Pulse; Storage/Transport)
(IEC 60068-2-32) Free Fall: 1M (3.281ft.)

NEMA TS1/2 Environmental Requirements for Traffic Control Equipment

• EMISSIONS

FCC Class A, Part 15; CE EN6100-6-2, CE EN6100-6-3

• SAFETY

UL 1604: Classified for ITE Equipment for use in hazardous locations: Class 1, Division 2 group A, B, C, & D:
Temp Code T4A; -25C < Tamb < 74C
UL 60950, EN 60950, IEC 60950, IEC 61000-6-2

• WARRANTY

Five years