Data line surge protector
series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment’s signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage.
Features Of SPD For Network / Data Line Surge Protector
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
RJ45 connector
Application Of SPD For Network / Data Line Surge Protector
CAT5e and CAT5 compatible
10/100 Base-T Ethernet protection
LAN, FDDI,CDDI, ATM
PDH, SDH, SPDH
Industrial control
Loss prevention system device; Security system; Security integration.
IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system
Installation And Wiring Diagram Of SPD For Network / Data Line Surge Protector
Specification Of SPD For Network / Data Line Surge Protector
Model | D05J4 | D05J4-8 | D05J4-16 | D05J4-24 | D05J8H |
Lightning projection zone(LPZ) | 2 | ||||
Standards Compliance | IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 | ||||
According to IEC61643 | III | ||||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 | D | ||||
Max continuous operating voltage Uc | 5V | ||||
Nominal discharge current (8/20µs) In | 3KA | ||||
Max discharge current Imax (8/21µs) Imax | 5KA | ||||
Voltage protection Level @C2(8/20µs) Up | ≤55V | ||||
Voltage protection Level @C3(1kV/µs) Up | ≤25V | ||||
Rated load current IL | 200mA | ||||
Limiting Voltage(10/700µs) | ≤20V | ||||
Cut-off Frequency fG | 250MHz | ||||
Response time tA (L-N/N-PE) | 1ns | ||||
Protection line | 1/2,3/6 | 1/2,3/6,4/5,7/8 | |||
Protection port | 1 | 8 | 16 | 24 | 1 |
Mounting | Be Installed between protected equipment and signal line | ||||
Adapt Transmission rate | 100Mbps 1000Mbps | ||||
Transmission standards | 100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6 | ||||
Dimension |
85(H)×25(W)×25(L)mm | 190 (H)×85(W)×48(L)mm | 482 (H)×86(W)×44(L)mm | 83 (H)×25(W)×25(L)mm | |
Interface form | RJ45 | ||||
IP code(IEC EN 60529) | IP20 | ||||
Error rate | ≤10-12 | ||||
Material/color | Aluminum/Blue | ||||
Insertion loss | ≤.3.0dB | ||||
Working conditions | Temperature: -40 to 85℃, Relative humidity: ≤95% |
Techwin is a professional spd supplier
in china.
Reviews
There are no reviews yet.